Dodge Key Fob and Car Key Programming

How Dodge car keys and key fobs are programmed, by model year, what you can sometimes do yourself, and when a mobile automotive locksmith is the faster, safer choice. Dealerkeys programs Dodge keys on site across East Tennessee.

Dodge key programming by model year

Dodge uses a different key system for older and newer vehicles. Find your vehicle below.

Dodge 1998–2006

May be self-programmed (older system) Models: RAM, Durango, Caravan, Neon, Stratus

Method: On-Board Key / Remote Procedure

  1. Insert working key, turn ON.
  2. Press and hold UNLOCK on working remote for 4-10 sec.
  3. Press PANIC button, release both.
  4. Press LOCK and UNLOCK on new remote.
  5. Turn ignition OFF.

Note: Requires at least one valid programmed remote to add a second self-programmed remote.

Dodge 2007 and newer

Locksmith required Models: RAM, Charger, Challenger, Durango, Journey

Method: OBD2 / RF Hub Programmer

Requires advanced OBD2 programmer (Autel IM608, AutoProPAD) to program Ignition Fobiks and Push-to-Start Proximity Fobs into the RF Hub module.

Note: PIN code required from vehicle RF hub or BCM.

This guide is general information. Procedures vary by model, trim and equipment, and a wrong attempt can leave a vehicle unable to accept new keys. Call or text with the year, make and model, and we will tell you what yours needs.

Can you program a Dodge key fob yourself?

Some older Dodge models (RAM, Durango, Caravan, Neon, Stratus, 1998–2006) list an on-board method above. Even where one exists, it usually needs a working key or remote to start it, it differs by model and trim, and it often programs the remote only, not a chip key. Newer Dodge vehicles, and any key whose chip the car must recognize, need a diagnostic programming tool.

Lost all your Dodge keys?

Dealerkeys is a mobile automotive locksmith with more than 26 years of experience and over 150,000 vehicles serviced across East Tennessee. For an all-keys-lost Dodge, we pick the lock if needed, make a new key, and program it at your vehicle. We quote the price first, and we make a key only after you show ID and proof of ownership. See our dead key fob guide if the car just will not start with your fob, or mail-in module repair for BCM, ECU and TIPM trouble.

What to have ready when you call

The year, make and model of the vehicle, the VIN if you can read it through the windshield, and where the vehicle is parked. Tell us how many keys you have left, if any, and what kind of key you want. Plan to be with the vehicle, with your ID and registration, title or other proof of ownership.

Dodge key questions

Can I program a Dodge key fob myself?

Some older Dodge models (RAM, Durango, Caravan, Neon, Stratus, 1998–2006) list an on-board method above. Even where one exists, it usually needs a working key or remote to start it, it differs by model and trim, and it often programs the remote only, not a chip key. Newer Dodge vehicles, and any key whose chip the car must recognize, need a diagnostic programming tool.

What if I lost all my Dodge keys?

We come to you, open the vehicle if it is locked, make a new key for your Dodge and program it on site, so there is no tow to a dealer. You need to be with the vehicle, with ID and proof of ownership.

How much does a Dodge key replacement cost?

It depends on the model, the year and the type of key. Call or text with the year, make and model, and we quote the price before any work begins.

Dodge locksmith service across East Tennessee

We dispatch to your vehicle in these areas and the towns around them:

Call or text Dealerkeys

Dispatch — Knoxville area
(865) 405-5359
Dispatch — Chattanooga area
(423) 250-5397

Programming guides for other makes

CallAreaRepair Shop